11 - 20
Hanskamp AgroTech B.V. (The Netherlands)
www.hanskamp.nl/en
MultiFill
EN
Dosing system - Dosiersystem - Système de dosage - Doseersysteem
12.
Loosen and remove the rotor of the pump by turning it
counterclockwise by hand.
Caution! Loosening the rotor manually poses a small risk of injury.
13.
Use the 50 m PVC hose as pressure hose and cut it to size. Use
the 2 m hose as suction hose.
Please note! Hanskamp can only guarantee proper operation if the length of
the suction hose is 2 meters or less.
14.
Take the suction hose and push it, from below, onto the right-hand feedthrough
coupling (art. no. 003-572-000).
15.
Push the HanskampQualityTube onto the other side of the feedthrough coupling
and secure it with a cable tie. Tighten the cable tie as firmly as possible.
16.
Push the pressure hose, from below, onto the hose connector on the left-hand
side (art. no. 001-179-000) (fig. 17).
Caution! The HanskampQualityTube is not suitable for acids. A hose kit
especially suitable for acids is available from Hanskamp.
Caution! When tightening the cable tie, there is a risk of injury from pinching.
Caution! Always cut the hose straight. A hose cut at an angle can impair proper
functioning.
Caution! Make sure that the end of the hose is placed at the bottom of the
storage tank, otherwise the pump will not be able to pump all the fluid.
1x pumping hose Ø11,5
HanskampQualityTube
art. no. 003-529-005
1x suction hose = 2 m
PVC hose Ø10x7
art. no. 001-006-002
1x pressure hose = 50 m PVC hose Ø14x10
art. no. 001-007-001
15
Pressure hose
Ø14x10 mm
HanskampQualityTube
16
17
Suction hose max. 2 m
Ø10x7 mm
