Hansin Special Equipment HS Series, Инструкция по эксплуатации и ремонту

Страница: 15 / 32

- 14 -
C. Precaution of Operator
1) Read the instructional manual and maintenance instructions, to familiarize
yourself with the operation.
2) Operator must have a proper training to build enough experience prior
operation of the equipment. to prevent harmful illness such epilepsy or seizure
you should take early medication, any physical disabilities may damage the
operation. It is your responsibility to perform self examinations to maintain
calmness and good health.
3) Be safe in you working area before operation, the road should be safe either,
you should check it from time to time.
4) Check the initial operation of all equipment devices as well as the driver brakes
properly.
5) Check the equipment condition with your naked eye everytime if the equipment
have damage condition, whether its from the structural part of the conclusion
or whether there are oil leakages and looses of bolts or pins, make sure to
take immediate action.
6) Seat belts and straps must be checked before the operation as per safety rules.
7) Equipment preventive maintenance must be checked daily, however the
lubrication should be conducted regularly prior defect of the equipment. If
damage occur, stop the operation.
8) Do not operate the equipment when the there's a bad weather condition such as
severe wind or heavy fog.
9)People are not allow around th workplace, building, etc. as they were
surrounded by some ground or objects which cause unsafe condition so always
put barricade caution when start the operation.
10) Please be reminded, to check the warning devices at all times, neglect to pay
attention should be involved in any safety violation which may cause people
and equipment accident.
11) Daily checking of controls must be check for any abnormality condition, do not
step on boarding platform before using the equipment.
12) There will be no assurance for modifications of equipment that can cause
people damage and structural defect
13) Stay away from any electrical wires and secure a safety distance when
operating the equipment.