Hanshow ESL Controller HS_C09978 Product Manual
6 Hanshow Copyright Reserved ©
Hanshow Technology Co., Ltd.
2.3
Key instruction
RESET hole supports press and hold operations, each owns different features.
2.3.1
Press
Press is used to switch IP address acquisition mode. This feature is limited to operate
when AP is offline because it can disrupt business operations. AP address will be
switched between DHCP and Static IP with each press.
⚫
AP IP gets from DHCP server when AP works at DHCP client mode
⚫
The following are default settings when AP works at static IP mode: IP --
192.168.1.199, Subnet mask -- 255.255.255.0, and Gateway -- 192.168.1.1.
Note:
The protection interval between two operations should be at least 30s, that is,
if you press again within 30s after last successful operation, your operation will be invalid.
2.3.2
Press and hold
Press and hold
RESET
for more than 5s, AP will restore factory setting and reboot.
Restore factory setting includes the contents below:
⚫
Restore to DHCP client mode.
⚫
Restore to auto search mode of ESL-Working.
⚫
Clear custom description.
⚫
Restore web login password to
admin
.
⚫
NTP restores to disable by default.
2.4
LED meaning
shows the LED indicators meaning.
Table 2-3 Status indicator meaning for HS_C09978
Status
Description
Steady on green
Ethernet is running normally, but the system is disconnected to
ESL-Working.
Blinking green
The system does not get IP address when AP powered-on.
Blinking green slowly
Ethernet is running, and the system is connected to ESL-
Working normally.
