Page EN-30
Troubleshooting table
Problem
Possible cause
Solution
8
The dishwasher can
be switched on/off,
but not cannot be
operated.
The dishwasher can
only be operated when
the door is closed.
Close the door.
9
The dishes are not
completely clean.
There are food scraps
which are encrusted
onto the dishes.
Soak dirty dishes prior to washing the dish-
es.
The dishes have not
been stacked optimally.
Stack the dishes in such a way that all
parts can be reached by the water jets
see „Loading the dishwasher“ on page
EN-14).
You have selected the
incorrect dishwashing
programme.
Select the correct dishwashing pro-
gramme see „Dishwasher programme
table“ on page EN-19).
The dishwasher de-
tergent is incorrectly
dosed.
Use the correct dosage of dishwasher
detergent see „Dishwasher programme
table“ on page EN-19).
The water pressure is
too low.
Turn the water tap on completely.
The spraying arm can
not rotate unhindered.
Ensure that no dishes are impeding the
motion of the spraying arm.
The nozzles on the
spraying arm are
blocked/calcified.
Clean the nozzles see „Cleaning the
spraying arm“ on page EN-21).
The “half load” function
is activated. The
in-
dicator lights up.
Press the “Half load” button.
The
indicator goes out.
10 The “Rapid” pro-
gramme indicator
flashes rapidly.
Water intake is too low. Open the tap completely. Remove the
kink in the inlet hose. Increase water pres-
sure.
The “Glass” pro-
gramme indicator
flashes rapidly.
Water overflow.
Find the gap in the seal (or have some-
one find it) and repair the leak (or have it
repaired).