
Page EN-10
Initial commissioning
Carry out a test run before using the dish-
washer for the first time. This removes pro-
duction residues and excess dishwasher salt
and you can test the proper functioning of the
dishwasher. Carry out the test run without
dishwasher detergent and dishes.
1. Open the tap completely and close the
dishwasher door.
Glas
1 Std.
Kurz
Programme
Normal
ECO
Intensiv
Ein/Aus
(2)
2. Press the on/off button (2) to switch on
the dishwasher.
An acoustic signal will sound to indicate
that it is switching on and all the indicators
will shortly light up.
Glas
1 Std.
Kurz
Programme
Normal
ECO
Intensiv
Ein/Aus
(4)
(24)
3. Press the programme selection button (4)
as many times as required for the “ECO”
indicator (24) to light up.
Initial commissioning
Verzögerung
Start/Pause
9h
6h
3h
(12)
4. Press the start/pause button
(12) to
start the dishwasher. You will hear rinsing
sounds and water coming in.
5. Pay attention for unusual sounds and wa-
ter leaking out.
6. When the programme is finished, an
acoustic signal will sound. Switch the
dishwasher off using the on/off button (2).
7. Then close the tap again. The test run is
now complete.
8. If no water has escaped and no unusual
noises have occurred, the dishwasher is
ready for operation and you can add the
detergent and put dishes into the dish-
washer see „Cleaners“ on page EN-11)
and see „Loading the dishwasher“ on
page EN-14).