Assembly
Page EN-17
[
18
19
20
6. Remove the four screws
18
together with
the washers
19
from the lower ring
20
of
the exhaust hood
1
.
20
21
7. Remove the lower ring
20
from the ex-
haust hood, leaving the metal ring
21
on
the upper edge of the housing as much
as possible.
5
17
8. Place the glass pane
5
on the exhaust
hood
1
.
9. If necessary, loosen the cable strap
around the LED light tube
15
and connect
the plug to a plug in the plug box
17
(it
must click into place).
22
15
5
10.
Guide the LED light tube
15
through
the recess
22
of the metal ring on the
upper edge of the housing and insert it
between the glass pane
5
and the metal
ring so that the bright dotted side (the
LEDs) face outwards towards the glass
pane
5
.
[
18
19
20
