Changing the dooor hinges
Page EN-21
CAUTION
Risk of injury!
The glass door is heavy.
■
Ask another person, if needed, to help
you with attaching or removing the
glass door
NOTICE
Risk of damage!
Improper handling of the appliance
may result in damage.
■
Do not tilt the appliance more than 45°.
■
Do not lay it on its side.
Depending on the space conditions, you can
change the direction of the door hinges on
your appliance. This work requires some
manual dexterity. Please read the following
steps completely before changing the hinges.
You will need the following tools to change
the door hinges:
– Medium-sized cross-headed screwdriver
– Medium size flat-headed screwdriver
Removing the glass door
1. Ensure that the appliance is not connect-
ed to the mains.
2. Remove the storage racks (6) and (7).
(10)
(11)
3. Gently push the blanking plate (10) and
hinge cover (11) upwards with a slotted
screwdriver and remove them.
Hold onto the blanking plate and hinge cover.
(13)
(12)
4. Ensure that the glass door (2) cannot slip
away and loosen the screws (12) on the
upper hinge (13). Use the cross-tip screw-
driver.
5. Remove the screws and the top hinge
and hold onto all parts.
6. Lift the glass door up and set it aside.
(14)
(15)
7. Remove the washers (14) from the lower-
hinge (15).
(15)
(16)
8. Loosen the screws (16) and remove the
lower hinge from the appliance.
Changing the dooor hinges
