Page EN-37
Troubleshooting table
Problem
Possible cause
Solution
The dishes are not
completely clean.
There are food scraps which
are encrusted onto the dishes.
Soak dirty dishes in water prior to
washing the dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way that
all parts can be reached by the water
jets (see „Loading the dishwasher“
on page EN-24).
You have selected the
incorrect dishwashing
programme.
Select the correct dishwashing
programme (see „Programme table“
on page EN-27).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of
dishwasher detergent (see
„Programme table“ on page EN-27).
The water pressure is too
low.
Turn the water tap on completely.
The spraying arm can not
rotate unhindered.
Ensure that no dishes are
impeding the motion of the
spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see „Checking
and cleaning the spraying arms“
on page EN-34).
Error indicators
Code
Solution
E1
: It takes too long for the water to
fill up
Turn the water tap on completely.
Arrange the inlet hose properly so that it is not kinked
(see „Connecting the inlet hose“ on page EN-12).
Ensure that the water pressure is correct. See
„Technical specifications“ on page EN-41.
E3
: The heating element is defective Have the appliance examined and repaired.
E4
: Water overflow
Switch off the tap. Find the gap in the seal (or have
someone find it) and repair the leak (or have it
repaired).
E8: Internal fault
Have the appliance examined and repaired.
Ed
: Internal fault
Have the appliance examined and repaired.
Ec
: Fault in the washing control system Have the appliance examined and repaired.
L4
: Motor fault
Have the appliance examined and repaired.