Operation
Before getting started
• Read chapter “Safety“ from page EN-4, in
particular the safety instructions.
• Set up and connect the appliance as de-
scribed in chapter “Before starting to use
the appliance“ from page EN-21.
Switching the appliance on
and off
NOTICE
Risk of damage!
If the refrigerating appliance has been
transported horizontally, lubricant from
the compressor may make its way into
the cooling circuit.
■
Allow the refrigerating appliance to
stand upright for 2 hours before start-
up. The lubricant will fl ow back into
the compressor during this time.
Switching on
1. Insert the mains plug in an easily accessi-
ble socket (see “Technical specifications”
on page EN-32).
The appliance is switched on.
– The compressor starts to work, the re-
frigerant flows through the pipes and a
quiet humming sound can be heard.
– All indicators will illuminate on the dis-
play for a few seconds.
– A few seconds later, the previously se-
lected temperature and operating mode
will light up.
2. If the appliance makes worrying noises,
check the solid base and remove any ob-
jects that may be on top of the appliance.
The appliance is checked for func-
tionality before being delivered. The
most recently made settings are
retained.
Operation
Switching off
1. Pull the mains plug out of the socket.
The compressor is switched off. The appli-
ance no longer refrigerates.
2. Empty the appliance and clean it (see
“Care and maintenance” on page EN-19).
3. Leave the appliance door slightly open to
prevent mould from forming.
Door alarm
The energy consumption and the tempera-
ture inside the appliance can increase if the
door is opened often or for long periods of
time. To avoid an excessive loss of cooling,
you will hear a beeping noise when the door
has been open longer than 2 minutes.
• Close the open door.
or
• Press the (8) button of the alarm function.
The “Alarm” function automatically
activates when the freezer is switched
on.
Operation
Page EN-13
