Page EN-29
Setup or under-worktop installation and connection
4. Press the
P
button (12) repeatedly until
the LED to the right of the
programme
symbol lights up.
5. Start the programme with the but-
ton (13).
The programme begins after a few seconds.
6. Ensure that no water is coming out and
no unusual sounds can be heard.
7. When the programme is finished, an
acoustic signal will sound.
Switch the dishwasher off using the but-
ton (1).
8. Slightly open the door to allow the moist
air to escape.
9. Close the tap.
If no water has escaped and no unusual nois-
es have been heard, the dishwasher is ready
for operation and you can now load it with
dishes.