Installation
Page EN-27
(17)
(12)
(14)
3. There are holes pre-drilled in the out-
side edges of the appliance door for the
slides (12) to be attached.
Use screws (17) to attach 2 sliders each
per door on the sides to be opened.
4. Push the runners (14) into the slides.
Close and open the cabinet door to
check that it closes fully and easily. If
necessary, correct the position of the
refrigerator.
5. Open the appliance door and cabinet
door at the same time. As you do so,
mark the best position for the runners on
the inside of the cabinet door.
(17)
(14)
6. Remove the runners from the slides
again.
7. Use two screws to fasten each of the
runners to the inside of the cabinet door
in the marked positions.
(14)
(15)
8. Press the covers (15) onto the runners.
9. Unscrew the slides again and push them
onto the fitted runners.
10. Screw the slides back onto the appliance
door.
(12)
(13)
11. Press the covers (13) onto the slides.
12. Check that the doors open and close
easily and that the appliance door seals
properly when closed.
If necessary, adjust the position of the re-
frigerator and of the slides and runners.
(17)
(19)
13. Once the doors open and close correct-
ly, screw the refrigerator to the built-in
cabinet. Use three short screws at the
top and two long screws at the bottom.
