First use
page EN-28
11. Attach the cabinet front panel to the dou-
ble-ended screws (13) using the brack-
ets (15).
12. Tighten the nuts (14) slightly.
13. Attach the pre-installed brackets (26) to
the bottom of the cabinet front panel us-
ing the screws (17).
(15)
14. Align the bracket (15) such that the cabi-
net front panel is level.
15. Tighten the nuts.
(18)
(17)
(12)
16. Affix the brackets (12) to the worktop us-
ing the screws (17).
17. Put the bracket covers (18) on the brack-
ets.
(21)
(21)
18. Put the hinge covers (21) back on.
600
97 – 1
77
(20)
(19)
19. Put the screw cover (20) over the dou-
ble-ended screws.
20. Insert the hinge faceplate (19) into the
lower hinge.
21. If you want to install a plinth, make sure
that it has a height of 97–177 mm and a
width of 600 mm and doesn’t cover the
ventilation grille of the appliance.
