Cleaning the oven
Page EN-25
Putting the oven door back on its
hinges
1. Hold the door on an angle using both
hands.
2. Hook the hinges into the holes in the side
panels.
3. Open the oven door completely.
4. Fold the clips
X
on both sides all the way
back.
5. Close the door carefully. The door must
sit flush when closed. If the door does not
sit flush when closed or if there is a crack-
ing sound when closing it, the door is not
hung properly.
In such a case, correct the hinges and
clips until the door opens and closes
smoothly.
Cleaning the glass panes
The oven door contains two glass panes
that should occasionally be cleaned on both
sides. You’ll need a flat-head screwdriver in
order to do this.
1. Take the oven door off its hinges.
2. Carefully pry off the two plastic holders
with a flat-head screwdriver.
3. Remove the two plastic holders and the
grid plate.
4. You can now remove the inner glass and
clean both panels of glass.
5. Put the glass panels back in place after
cleaning.
6. Attach the left plastic holder as follows:
1
2
7. Insert the grid plate into the left plastic
holder.
