Troubleshooting table Page EN-29
Problem
Possible cause
Solutions, tips
Appliance
switches itself
off.
Brush/nozzle
blocked.
Press the On-Off foot switch/
suction force control unit,
disconnect the mains plug
from the socket, clean the
brush/nozzle.
Motor protection
filter blocked.
Overheat
protection has
been activated.
Press the On-Off foot switch/
suction force control unit,
disconnect the mains plug
from the socket, allow the
appliance to cool down for at
least 30 minutes and clean the
motor protection filter.
Telescopic tube
/ suction hose is
blocked.
Press the On-Off foot switch/
suction force control unit,
disconnect the mains plug,
check the telescopic tube and
suction hose for blockage and
clean if necessary.