Hanse 350, Руководство владельца и по безопасности, Страница: 37 / 53

H a n s e 3 5 0
33
•
Install electrical systems or conduits in the cylinder box.
•
Use the cylinder box as a stowage space.
Any modifications to the concept of the LPG system may only be carried out by an expert for
LPG systems on boats and by the shipyard.
The cylinder box is ventilated outboard. Possible water that has penetrated is drained through
the opening.
Keep the ventilation opening free of blockages. Check regularly
the state of the opening!
1.10.2. Replacement of the gas cylinder
Replace the gas cylinder as follows:
•
First, switch off all gas consumers.
•
Switch off the engine and the generator.
Never smoke or use open fire whilst replacing the cylinder.
•
Shut-off the valve at the cylinder.
•
Remove the pressure regulator at the valve of the cylinder. Only use appropriate tools so that
you don’t damage the connection and the fitting.
•
Detach the empty cylinder from the mounting and take the cylinder from the cylinder box.
•
Insert the new cylinder in the mounting.
•
Fasten the mounting to the cylinder.
•
Check if the connector thread at the cylinder is damaged.
Cylinders with damaged threads may not be used. There is a
danger of leaking gas.
•
Carefully place the union nut and screw it hand-tight.
•
Screw the union nut tight with an appropriate tool.
•
Check whether the connection is tight.
Never use grease at the cylinder connection or the valves.
1.10.3. Operating the gas system
The gas system must be operated with great care. You should therefore keep to the following
sequence:
•
Check if the cooker valve is shut.
•
Open the valve in the cylinder box.