Hans Grohe Talis S 32420000, Руководство по сборке

Страница: 21 / 232

English
4
Important!
The fitting must be installed, flushed and
tested after the valid norms!
Assembly
1.
Flush through the supply pipes.
2. Mount the ball S - unions.
3. Fasten the mixer with the washers.
The hot and cold supplies must be of equal
pressures.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
32420000/32473000: The flow is changed from bath
to shower function by pulling the knob at the upper
side of the spout. After shutting off the water flow,
the mixer returns automatically to the bath function.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure:
1,6 MPa
( 1 MPa = 10bar = 147 PSI )
Hot water temperature:
max. 80° C
Recommended hot water temp.: 65° C
Centre distance:
Connections G ½": cold right - hot left
Rate of flow: ca. 18 l/min 0,3 MPa
anti-pollution function
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0,15 MPa.
To adjust the hot water limiter on single lever
mixers, please see page6.
No adjustment is necessary when using a
continuous flow water heater.
Important!
The non return valves must be checked once a
year.
Spare parts
(see page 3)
1 handle
32092000
1.1 screw cover 96338000
2 flange 96656000
3 nut 96690000
4 cartridge cpl. 92730000
5 locking screw for handle 96059000
6 flange Ø 68 mm 96467000
7 S - unions (2) 94140000
8 noise reduction (2) 96429000
9 aerator cpl. (10) 13956000
10 selector assy 94077000
11 diverter knob 96466000
12 non return valve DW 15 (10) 94074000
13 hose connection 96044000