Hans Grohe Pontos Base, Инструкция по эксплуатации / Руководство по установке

Страница: 6 / 24

6
English
Safety instructions
During installation, gloves must be worn to prevent crushing injuries or cuts.
There are basic risks when handling electrically operated devices. Please
therefore follow legal health and safety guidelines, any other applicable
occupational health and safety rules and provisions set out by the relevant
professional associations.
Do not make any changes to the Pontos Base. The manufacturer is not liable for
damages resulting from inappropriate alterations.
During installation, please note the stipulated values for the voltage and current
(see Specifications).
Works on electrical installations or controls must only be performed by qualified
electricians.
Unplug the mains adapter and remove the batteries before commencing work.
Check the mains adapter on a regular basis and inform a qualified electrician
in the event of damage.
General information
• These operating instructions will enable you to use your Pontos Base safely and
efficiently.
• They are included in the scope of delivery and must be stored in a place where
the user can access them at all times.
• As technology develops, images and descriptions in these operating instructions
may differ slightly from the actual Pontos Base leakage protection delivered to
you.
• We assume no liability for damages caused by disregarding these operating
instructions.
• Installation, maintenance and repairs must only be performed by trained,
authorised specialists. In other words, people who are qualified as a result of
their education, training or experience to perform the required tasks, recognis-
ing and preventing possible risks in the process. They must be able to demon-
strate knowledge of the relevant safety standards and provisions as well as
provisions set out by the relevant professional associations. They must also have
read the operating instructions.
• The transmitter / receiver unit operates in the ISM band (2.4 GHz). Installation
near devices assigned to the same channel (Wi-Fi devices, RF components, etc.)
must be avoided.
• If operated in an unsuitable environment, for example in buildings or rooms with
reinforced concrete walls, steel and iron frames or near metal obstacles such as
furniture, the wireless reception may be disrupted or stopped. It may be
necessary to connect a Wi-Fi repeater to the main router to increase the
wireless signal range.
• The product must always be updated to the latest firmware to ensure seamless
functionality.
The following European and German standards were used to develop and
construct the Pontos Base:
• DIN EN 806
• DIN 1988
• DIN 3553
Hansgrohe SE hereby declares that the Pontos Base wireless unit type complies
with Directive 2014/53/EU. The full text of the EU Declaration of Conformity can
be accessed on the following website: pro.hansgrohe.com
Intended use
• The product is designed solely for drinking water.
• The Pontos Base offers effective leakage protection in accordance with DIN
3553 for apartments and single-family homes.
• The leakage protection must only be installed in ventilated and heatable rooms.
• The system cannot guarantee 100 % protection against water damage.
• Any other use or use beyond what is specified is deemed to be not for the
intended purpose.
• Intended use also includes following these operating instructions.
Assembly instructions
• The product must be examined for damage in transit prior to installation. No
claims for damage in transit or surface damage will be accepted following
installation.
• The pipelines and the tap must be installed, flushed and tested in accordance
with the applicable standards.
• Country-specific installation guidelines must be observed.
• This product must be installed solely in drinking water installations as per DIN
1988, straight after the water meter. The product must be disconnected from the
power supply during installation.
• It is important to note the flow direction, which is indicated by an arrow on the
housing.
Specifications
Battery: 9 V block (6LR61)
Back-up battery (on PCB): CR 2032
Protection type: IPX3
Network connection: Wi-Fi
Network support TCPIP/IPv4
MQTT on port 8883
Operating pressure: max. 1.6 MPa
Recommended operating pressure: 0.1 - 0.5 MPa
(1 MPa = 10 bar = 147 PSI)
Flow performance DP 1.0 bar: 7.3 m³/h
Ambient temperature: max. 5°C - 40°C
Operating temperature: 5°C - 30°C
Torque from the motor: min. 2 Nm
Weight: approx. 1,275 g
Mains adapter compliant with DIN EN 61558-2-16: XY24S-1202000Q-U
Cable length: 180 cm
Input voltage: 100 - 240 VA
Power frequency: 50 - 60 Hz
Output voltage: 12 VD
Electric current: 2 A
Mains adapter: DC adapter 2.1 x 5.5 mm
Protection class: 3
{
Disposal of used batteries and used electrical and
electronic devices
(applicable in European Union mem-
ber states and other European countries with a separate
collection system for these products).
The symbol on the battery, product or packaging indicates that the
product or battery should not be treated as normal household waste. By correctly
disposing of the product and battery, you are protecting the environment and
human health. The environment and health of living beings are put in danger when
you do not dispose of these products correctly. Recycling materials also helps to
reduce the consumption of raw materials. To ensure that the product and battery
are correctly disposed of, please take the product to a site that recycles electrical
and electronic devices. You can obtain further information on how to recycle this
product or battery from your local council, local waste management companies or
the shop where you bought the product.
Explanation of symbols
Maintenance
• We recommend a maintenance interval of 2 years.
• Maintenance should be performed on the turbine, input filter screen, cable
harnesses and stop valve.
• Visual inspection of the cable harnesses (cable kinked? Correctly inserted?)
• Check turbine and stop valve:
Select “Away” profile (e.g. with 10 litre limit value) and tap the water. If the stop
valve closes after 10 litres, the turbine and stop valve are working seamlessly.
• Check input filter screen
Shut off and depressurise drinking water installation. Disconnect from main
power supply. Completely undo the screws on the housing. Remove the Pontos
Base. Check the input filter screen. If necessary, remove it and rinse it out with
clean water (replace if necessary). Put it back together in the reverse order.
Slowly reopen the drinking water supply.
• The battery must be replaced after two years at the latest. Do not use recharge-
able batteries.
Dimensions
(see page 18)
Service parts (see page 18)
Optional accessories
(not included in the scope of deliv-
ery)
• Pontos Scout #15887000