39
1. Turn on the angle valve
2. Switch on the power supply
3. Safety self-inspection
①
After power-on, the night light flashes and the self-inspection starts;
②
When the buzzer of the main unit beeps once, the self-inspection is completed, and the night light stops flashing;
③
The function mode is on, and the toilet can be used normally.
To check the tightness of the pipe connections and make sure that there is no water leakage, turn the angle valve
counterclockwise to adjust the opening to the maximum.
Preparation before Use
Tips: Press the leakage test button before use. If the reset button bounces, it indicates that the leakage protection
function is normal.
Plug the leakage protection plug of the power cord into the power socket, and press the reset button.
If the power indicator light is on, it indicates that the power is on.
11
Reset button
Power indicator light
Power indicator light is on
Test button
Water inlet angle valve
Содержание LavaPura Uno B305 22400007
