Hans Grohe Allegro E 04130 0 Series, Инструкции по установке / Гарантия

Страница: 14 / 16

14
1 Solaris E handle 88530XX0
2 Talis S handle 88549XX0
3 C handle 88610XX0
4 Metris S handle 88713XX0
5 Focus S handle 88714XX0
6 Allegro E handle 88719XX0
7 Metro E handle 88721XX0
8 handle escutcheon 88734XX0
9 elbow 28071XX0
10 handshower escutcheon 97159XX0
11 check valve 94074000
12 spout sealing ring 88512000
13 aerator 13956XX0
14 spout escutcheon 97779XX0
15 screw 96029000
16 aerator 13914XX0
17 C spout 88604XX0
18 escutcheon for C spout 88735XX0
19 S 100 3-Jet handshower 28504XX1
20 C 100 3-Jet handshower 04072XX0
21 E 100 3-Jet handshower 28502XX1
XX = color code
00 = chrome
62 = oil rubbed bronze
82 = brushed nickel
83 = polished nickel
Troubleshooting
Problem Possible cause Solution
Valve outputs both hot and
cold water, but not mixed
Supplies are reversed Disconnect supplies from
valve, reconnect to correct
inlets
Loss of pressure as water is
made warmer or cooler
Filters clogged Clean the filters
Water drips constantly from
spout or handshower
Ceramic plates in stop unit
damaged
Replace cartridge.
Temperature is erratic Thermostatic cartridge dirty
or faulty
Clean the filters. If cleaning
doesn't help, replace the
thermostatic cartridge
Handle turns freely but
doesn't turn water on or off
Handle not installed cor-
rectly or handle screw not
tightened.
Reinstall handle. Make sure
that the screw engages the
slot. Tighten the handle
screw.
9
10
11
19
20
21