BGC08006
Step 1:
Identify all parts packed in the carton against the parts list. Remove all protective materials. If any parts are missing or damaged, call our Customer Service Center at 1-800-416-3511.
Do not attempt assembly
any parts are missing or damaged.
Step 2:
Step 3:
Attach love seat arm by inserting two
mm bolts with washers through the holes in front seat portion of the love seat frame and into the holes in the love seat arm shown in
Figure 2
. Attach back of love
seat arm by inserting two
mm bolts with washers through holes in the back portion of love seat frame and into the holes in the rear portion of the love seat arm as shown in
Figure 2
.
Hand tighten only
.
Repeat for the opposite side.
Step 4:
Tighten all bolts using the hex bolt driver provided. Tighten each bolt a few revolutions at a time, alternating between bolt connections until all bolts are tight.
Do not over tighten. Over tightening may strip
bolts or damage the welds or frame.
Cover all bolts with bolt covers provided.
Step 5:
Your love seat is now ready for use. If you have any questions, please call our Customer Service Center at1-800-416-3511.
IMPORTANT NOTE: Damage to welds or frames resulting from over tightened bolts or improper assembly is not covered under our warranty. Please read all instructions carefully before assembly. If you
have any questions regarding your assembly, call our Customer Service Center at 1-800-416-3511.
Attach the seat frame to the back frame by using four 5/16"x40 mm bolts and washer as shown in
Figure 1.
Guide these bolts through the holes in the seat frame, into the fixed nuts already in place
in the back
frame.
Do not over tighten
.
5/16"x25
5/16"x40
IMPORTANT. PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY.
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPT
Figure 2
C
* NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE
D
F
H
G
E
H
G
Figure 1
A
B
H
F
G
FOOT CAP-1
F
H
G
E
H
G
8
5/16" X 40 MM BOLT
Ø8.5 X 1.5 MM
WASHER
LEFT ARM
RIGHT ARM
BOLT COVER
HEX BOLT DRIVER
FOOT CAP-1
FACTORY ASSEMBLY
HW0005
HW0022
HW0006
FC0030
1
12
HW0275
12
4
5/16" X 25 MM BOLT
HW0186
1
1
1
1
BACK FRAME
SEAT FRAME
PARTS LIST
DESCRIPTION
ORDER PART # QTY
A
B
C
D
E
F
G
H
I
FOOT CAP-2
FACTORY ASSEMBLY
FC0308
SK0939
SK0940
SK0941
SK0942
