12
Manual
drainage
system mode
(If your
operating
using the
“Manual
drainage
system
mode”, ice
water will
restrict drain
water from
flowing out)
Manually
drain the water
from the
icebox.
There is no drain hole in
the room
Ref: Fig.A & Fig.B & Fig.C
Screw Nut and Switch
Condition
Screw nut(front)
③
+seal washer(front)
④
lock
Screw nut(back)
⑦
+seal washer(back)
⑥
lock
Screw nut for valve seal
⑪
lock
Screw nut for valve seal
⑫
lock
Force water outlet switch
⑧
OFF
1.
Please ensure the screw nut and switch are in the above
lock condition to avoid water leakage
2.
Periodically check the ice box (1) water level ruler (5).
If the water level exceeds the ruler water level, then
drain off the unnecessary water.
3.
When draining off the water, you can remove the
icebox (1), screw nut (front) (3) and seal washer (front)
(4). Use the holder to take out the unnecessary water,
then tighten the above screw and seal washer.
The controls of your ice maker
The Ice Maker should be placed where the ambient temperature is between 10-32
℃
(41-95
℉
degrees
Fahrenheit
)
. If the ambient temperature is above or below this range, the performance of the unit may be affected.
