HANNspree HL407UPB, Руководство пользователя

Страница: 19 / 20

User’s Manual
19
ERROR MESSAGE & POSSIBLE SOLUTIONS
 CABLE NOT CONNECTED:
1. Check that the signal-cable is properly connected, if the connector is loose, tighten the
connector’s screws.
2. Check the signal-cable’s connection pins for damage.
 INPUT NOT SUPPORT :
Your computer has been set to unsuitable display mode, set the computer to display mode given
in the following table.
FACTORY PRESET TIMING TABLE:
MODE RESOLUTION
HORIZONTAL
FREQUENCY (KHz)
VERTICAL
FREQUENCY (Hz)
1
640×480 @60Hz 31.469 59.940
2
720x400@70Hz 31.469 70.087
3
800×600 @60Hz 37.879 60.317
4
1024×768 @60Hz 48.363 60.004
5
1280×720 @60Hz 45.000 60.000
6
1360×768 @60Hz 47.712 60.015
7
1600×900 @60Hz 55.540 59.978
8
1920×1080 @60Hz 67.500 60.000
(Video mode)
MODE RESOLUTION
1 720×480i @60Hz
2 720×480p @60Hz
3 720×576i @50Hz
4 720×576p @50Hz
5 1280×720p @50Hz
6 1280×720p @60Hz
7 1920×1080i @50Hz
8 1920×1080i @60Hz
9 1920×1080p @50Hz
10 1920×1080p @60Hz
** We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee
the image quality.