CARE AND MAINTENANCE
Always turn off the unit after use.
Keep the unit away from magnetic objects, water or heat sources.
Use a clean soft cloth moistened with lukewarm water to clean the cabinet. Never
use chemical cleaners that could damage the finish of the unit.
Never touch the CD pickup and lens. If fingerprints get on the pickup lens, clean it
gently with a commercial lens cleaner.
Disconnect the unit from any power sources before cleaning.
To remove a disc from its storage case, press down on the centre of the case and
lift the disc out, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc’s recorded surface with
a soft cloth. Unlike conventional records, compact discs have no grooves to collect
dust and microscopic debris so gently wiping with a soft cloth should remove most
particles. Wipe in a straight line from the inside to the outside of the disc. Small
dust particles and light stains will have absolutely no effect on reproduction quality.
Never use chemicals such as record sprays, anti-static sprays, benzene or
thinners to clean compact discs. These chemicals can irreparably damage the
disc’s surface.
Discs should be returned to their cases after use. This avoids serious scratches
that could cause the Laser pickup to skip.
Do not expose discs to direct sunlight, high humidity, or high temperatures for
extended periods. Long exposure to high temperatures can warp the disc.
Do not stick paper or write anything with a ballpoint pen on the label side of the
disc.
SPECIFICATIONS
Frequency Range:
AM 530 - 1600 KHz
FM 87.5 - 108 MHz
Power Supply:
AC 120V ~ 60Hz
DC 12V
(UM-2 x 8 pcs)
Specifications are subject to change without further notice.
-9-
TROUBLE SHOOOTING
Symptom
Possible Problem
Solution
AC power cord is not plugged
properly into a wall outlet or
the connector is not plugged
into the AC Socket on the back
of the System.
Re-plug the AC power
cord into the wall outlet
and the connector into AC
Socket on the System.
Unit
does
not
respond (no power)
Wall outlet is not functioning.
Plug another device into
the same outlet to confirm
the outlet is working.
Radio no sound
Unit not in RADIO function
mode.
Volume set at minimum
Tap
FUNCTION
button to
RADIO position.
Increase Volume
Noise
or
sound
distorted on AM or
FM broadcast
Station not tuned properly for
AM or FM.
FM: Wire antenna is not fully
extended.
AM: The reception at the set
location is poor.
Retune the AM/FM broadcast
station.
FM: Fully extend or reposition
the FM wire antenna.
AM: Change the position for the
best reception.
CD disc does not
play
Unit not in CD function
mode.
Audio disc is installed
incorrectly.
It the disc is self-compiled, the
media used may not be
compatible with the player.
Select CD mode.
Insert audio disc with label
side up.
Use better quality blank media
and retest.
Audio disc skips
while playing
Disc is dirty or scratched.
Wipe disc with clean cloth or
use another disc.
Intermittent
sound
from the player
Dirty or defective disc
Dirty pick up lens
Player is subject to excessive
shock or vibration
Clean or replace the
defective disc
Use a lens cleaning disc to
clean the lens
Relocate the player away
from shock or vibration
Unit gets warm after
extended play at
high volume
This is normal.
Turn the unit off a period
of time or lower volume.
