1
BAND button
11
Carry handle
2
PROG/MEM button
12
AUX-IN jack
3
FOLDER/M− button
13
Speaker
4
MODE/M+ button
14
LCD display
5
STOP CD/USB button
15
FUNCTION switch
6
PLAY/PAUSE button
16
VOLUME control
7
SKIP−/TUN− button
17
Battery Compartment
8
SKIP+/TUN+ button
18
AC socket
9
Rod antenna
19
USB port for MP3 playback
10
CD Compartment
- 2 -
AC OPERATION
Before operation, please make sure that the VOLTAGE mentioned on the unit is same
as the voltage of your local area. Unravel the AC power cord, insert one end into the AC
socket on the set, and the other end into a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands.
2. When planning not to use this unit for a long time, disconnect the power cable from
the wall outlet.
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in
order to avoid shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC cord set completely. Open the battery compartment door and insert
8 pieces UM-2 "C" size batteries into the battery compartment with battery polarity as
shown inside the battery compartment.
RADIO OPERATION
1. Set the
FUNCTION
switch to
RADIO
position.
2. Press the
BAND
button to select the desired
AM
or
FM
broadcasting.
3. Auto Tuning :
Press and hold the
SKIP+/TUN+
or
SKIP−/TUN−
button for approximately 1 second, it
will start to search the next radio station in the direction of the search. The search
operation simply finds stations with strong signals.
4. Manual Tunning:
Stations with weak reception can only be tuned in manually. Press the
SKIP+/TUN+
or
SKIP−/TUN-
button, the unit skips 0.05 MHz (FM) or 9 KHz (AM) in the direction of skip.
5. Adjust the sound level by rotating the
VOLUME
control.
6. To turn off the radio, set the
FUNCTION
switch to other position.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM
reception, the unit has a built-in antenna, turn the whole unit for best reception.
-3-
