manualshive.com logo in svg

Hanna Instruments Pool Line HI981914, Инструкция по эксплуатации, Страница: 14 / 56

Поделиться
Скачать
Hanna Instruments Pool Line HI981914 Скачать руководство пользователя страница 14

14

GENERAL OPERA

TIONS

7.2.  CONNECTING THE PROBE

To prepare the instrument for field measurements close the serial communication socket and all unused 
connector sockets with proper stopper (to ensure waterproof protection). Use the holed temperature 
rubber cork for the temperature socket when temperature probe is connected.
Connect the pH electrode and the temperature probe to the BNC and temperature sockets on the top of 
the instrument. Push the pH electrode sleeve to cover the connector accommodation.
The temperature probe is used in conjunction with the pH electrode to utilize the instrument’s ATC 
capability, but it can also be used independently to take temperature measurements. If the probe is 
disconnected, temperature can be set manually with the   /   keys.

7.3.  TURNING THE METER ON

Turn the instrument ON by pressing 

ON/OFF

 key.

At start-up the display will show the Hanna Instruments logo for a few seconds followed by the 
percentage indication of the remaining battery life, then enters the measurement mode.

7.4.  BACKLIGHT FEATURE

The instrument is provided with a Backlight feature. Press 

LIGHT

 to switch the backlight on/off.

Note:

 The backlight automatically shuts off after a set period (see METER SETUP section for 

details).

Содержание Pool Line HI981914

























































Отзывы:

Нет отзывов