23
22
WARRANTY
All Hanna Instruments
meters are guaranteed for two years
against defects in
workmanship and materials when used for their intended purpose and maintained
according to instructions.
Electrodes and probes are guaranteed for a period of six months
.
This warranty is limited to repair or replacement free of charge.
Damage due to accident, misuse, tampering or lack of prescribed maintenance
are not covered.
If service is required, contact the dealer from whom you purchased the instrument.
If under warranty, report the model number, date of purchase, serial number and
the nature of the failure.
If the repair is not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments, first obtain a
Returned Goods Authorization number from the Customer Service department and
then send it with shipping costs prepaid.
When shipping any instrument, make sure it is properly packaged for complete
protection.
All rights are reserved. Reproduction in whole or in part is prohibited without the
written consent of the copyright owner.
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.
Extension cables for screw-type electrodes (screw to BNC adapter)
HI 7855/1
Extension cable 1 m (3.3') long
HI 7855/3
Extension cable 3 m (9.9') long
OTHER ACCESSORIES
HI 710005
Voltage adapter, 115 Vac / 12 Vdc, US plug
HI 710006
Voltage adapter, 230 Vac / 12 Vdc, European plug
HI 710012
Voltage adapter, 230 Vac / 12 Vdc, UK plug
HI 710013
Voltage adapter, 230 Vac / 12 Vdc, S.Africa plug
HI 710014
Voltage adapter, 230 Vac / 12 Vdc, Australian plug
HI 76404
Electrode holder
HI 7669/2W
Temperature probe with 1 m (3.3') cable
HI 8427
pH/ORP electrode simulator
HI 931001
pH/ORP electrode simulator with LCD
HI 98501
ChecktempC
pocket-size thermometer (range: -50.0
to 150.0°C)
CONNECT TO
SCREW TYPE
ELECTRODES
CONNECT TO THE
BNC SOCKET
OF THE METER
HI 7855 SERIES CABLE CONNECTORS
CONNECTOR AND 3.0 mm (0.12") CABLE WITH BNC
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment in which it is
used. Operation of this instrument in residential areas could cause unacceptable interferences to radio
and TV equipment, requiring the operator to take all necessary steps to correct interferences.
The glass bulb at the end of the pH electrode is sensitive to electrostatic discharges. Avoid touching
this glass bulb at all times. During operation, ESD wrist straps should be worn to avoid possible
damage to the electrode by electrostatic discharges.
Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC
performance.
To avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed
24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in microwave ovens.
