Hanna Instruments PCA 300 Series Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 60

Hanna Instruments PCA 300 Series Скачать руководство пользователя страница 4

4

PRELIMINARY EXAMINATION

Remove the analyzer from the packing material and examine
it carefully to make sure that no damage has occurred dur-
ing shipping. If there is any noticeable damage, notify your
Dealer immediately.

Each analyzer is supplied complete with:

• 2 reagent bottles (1 indicator and 1 buffer solution)

(

PCA 300

and

PCA 301

only)

• 2 reagent bottle caps (

PCA 300

and

PCA 301

only)

• 1 DPD compound powder (

PCA 300

and

PCA

301

only)

• tubing
• mounting brackets

Note

Save all packing materials until you are sure that the instru-
ment functions correctly. Any damaged or defective items must
be returned in their original packing materials together with
the supplied accessories.

WARNING

The

PCA300

and

PCA 301

series of Chlorine Analyzers are

not designed for use with samples that are inflammable or
explosive in nature. If any sample solution other than water is
used with these products, test the sample/product compat-
ibility to assure user safety and proper product performance.

Safety Precautions

Please take the time to read the safety precautions carefully
wherever they appear in this manual. They are provided to
prevent personal injury and damage to the instrument. This
safety information applies to the operators and service per-
sonnel and the following two captions are used:

CAUTION

: identifies conditions or practices that could re-

sult in damage to the instrument or persons;

WARNING

: identifies conditions or practices that could

result in personal injury or loss of life.

Note

Because of the inherent dangers in handling chemical
samples, standards and reagents, HANNA Instruments
strongly recommends the users of this product review the
Material Safety Data Sheets and become familiar with safe
handling procedures and proper usage prior to handling
any chemicals.

«
...
2
3
4
5
6
...
»

Содержание PCA 300 Series





























































Отзывы:

Нет отзывов