Hanna Instruments HI98494 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 72

Hanna Instruments HI98494 Скачать руководство пользователя страница 61

61

LOGGING

13.4. LOG NOTES
Remarks

The meter can store up to 20 remarks. A remark can be associated with each sample.
To add a remark:

1. Select “Log Notes” from the Log menu, and then select “Remarks”. The display shows a list of

stored remarks.

2. Press

New

to create a new remark, and use the keypad to enter the new remark in the text box.

3. Press

Delete

to delete the selected remark from the meter. If the deleted remark is used in an

existing lot, the information will be still available in the lot data.

Delete All Remarks

When this option is selected the instrument will ask for confirmation: “Do you want to perform the
current operation?”.
Press

Yes

to delete or

No

to return to the previous screen.

13.5. PC CONNECTION

The logged data from a probe and meter can be transferred to a PC.
• Use the USB A to C cable to connect the meter to the PC.
• The meter will appear as a flash drive on the computer.
• Save files to the PC. All logs will be listed as CSV files (comma separated values).
The CSV files may be opened with any text editor or spreadsheet application.
All features of the spreadsheet program can be used to analyze and graph the data.

«
...
59
60
61
62
63
...
»

Содержание HI98494









































































Отзывы:

Нет отзывов