manualshive.com logo in svg

Hanna Instruments HI98494, Инструкция по эксплуатации, Страница: 59 / 72

Поделиться
Скачать
Hanna Instruments HI98494 Скачать руководство пользователя страница 59

59

LOGGING

8.  Use the arrow keys to move the cursor in the graph and highlight a sample. The sample data is 

displayed below the graph.

9.  Press 

ESC

 key to return to the parameter list.

Press 

Options

 (from the log list screen) to Export or Delete an individual Log.

Export selected log data to USB-C Flash Drive:

1.  Insert a USB-C flash drive (or USB-A with cable adapter) into the USB-C connector located on 

the top of meter. See section 13.5. PC CONNECTION for details.

2.  Select Export Log. Connecting will be displayed followed by the file transfer information.

When all files have been transfered, “File transfer completed” message will be displayed.

 

 

Log On Demand

Select this option to view the log on demand lots and plot selected parameters.

1.  Use the arrow keys to select the desired lot and then press 

View

.

2.  Press 

View

 to review the log data.

 

3.  Press 

Info

 to see record information for the current sample: time and date, remark or serial number.

 

4.  Press 

Data

 to return to the previous screen or 

Jump

 to select a different sample in the same lot. 

When 

Jump

 is pressed, a text box appears to insert the desired sample number.

Содержание HI98494









































































Отзывы:

Нет отзывов