Hanna Instruments HI98494 Скачать руководство пользователя страница 27

Страница: 27 / 72

PARAMETER SETUP

Auto:

The meter automatically chooses the range (µS/cm or mS/cm) to
optimize the measurement.

Auto mS/cm:

The meter automatically chooses the resolution to optimize the
measurement, readings will be in mS/cm only.

Specified numeric resolution: The meter will not autorange, the measurement will be displayed with

the selected resolution only.

Note:

A small letter “A” added to the μS/cm or mS/cm unit refers to an absolute conductivity

value.

TDS Resolution

Option: Auto, Auto ppt, 1 ppm, 0.001 ppt, 0.01 ppt, 0.1 ppt, 1 ppt

Press

Modify

and use the arrow keys to select the desired TDS resolution.

Press

Select

to confirm or the

ESC

key to return to the previous screen.

Auto:

The meter automatically chooses the range (ppm or ppt) to optimize

the measurement.

Auto ppt:

The meter automatically chooses the resolution to optimize the

measurement, readings will be in ppt only.

Specified numeric resolution: The meter will not autorange, the measurement will be displayed with

the selected resolution only.

7.3. PARAMETER COEFFICIENTS
EC Reference Temperature

Option: 20 °C or 25 °C

This value is used for temperature compensated conductivity. All EC measurements will be referenced
to the conductivity of a sample at this temperature.
Press the functional key to select the desired EC reference temperature.

Содержание HI98494









































































Результаты поиска

Содержание HI98494

Отзывы:

Hanna Instruments HI98494, Инструкция по эксплуатации, Страница: 27 / 72

Результаты поиска

Содержание HI98494

Отзывы: