Hanna Instruments HI98192 Скачать руководство пользователя страница 48

Страница: 48 / 68

Use

keys to highlight the desired range then press

View

The list of records corresponding to the selected range is displayed.

If no data were logged on the current range, the instrument will display “

No Records

” message.

Use

keys to scroll between the records from the list.

Press

Delete All

to enter

Delete All

screen.

Press

Delete

to enter

Delete records

screen.

Press

to view more information of the selected record.

is pressed:

Use

Pg Up

Pg Down

keys to toggle the complete information screens.

Use

keys to scroll between stored records.

Delete

is pressed:

LOG ON DEMAND

Use / key to select the record to be deleted and then press

CFM

Press

ESC

to exit.

Delete All

is pressed the instrument asks for confirmation.

Press

CFM

to confirm or

ESC

to exit without deleting.

For

USP range

, the instrument will display the sample ID, analysis time and date:

Содержание HI98192





































































Результаты поиска

Содержание HI98192

Отзывы:

Hanna Instruments HI98192, Инструкция по эксплуатации, Страница: 48 / 68

Результаты поиска

Содержание HI98192

Отзывы: