manualshive.com logo in svg

Hanna Instruments HI98192, Инструкция по эксплуатации, Страница: 37 / 68

Поделиться
Скачать
Hanna Instruments HI98192 Скачать руководство пользователя страница 37

37

GENERAL PARAMETER SCREENS

Select Profile
Highlight 

Select Profile.

 

Press 

Select

.

The list with stored profiles is displayed.

Press 

Add

 to add a new profile to the list (max 10).

Use the 

    /     

keys to highlight the desired profile.

Press 

Select

 to choose the profile and exit to SETUP.

Press 

View

 to view profile information.

The profile information includes the date and the time when the profile was added, information about 
calibration on EC and NaCl range, the setup cell constant, information about temperature setting, 
reference temperature, temperature compensation mode, temperature coefficient, temperature source 
and information about fixed ranges.
If calibration exists, the 

GLP

 functional key is displayed. Press 

GLP

 

EC 

to view the corresponding 

GLP EC information.
Press 

GLP NaCl

 to view the corresponding GLP NaCl information.

Note: If the EC or NaCl calibration was not performed while the current profile is set, or 

calibration was cleared, the corresponding GLP key is not displayed.

SETUP

Содержание HI98192





































































Отзывы:

Нет отзывов