Hanna Instruments HI 9828, Инструкция по эксплуатации

Страница: 50 / 60

50
Chapter 7 - PC CONNECTION MODE
The logged data can be transferred to PC by means of the USB connector HI
7698281 and the HI 92000 Windows
® compatible application software.
HI 92000 allows you to use the powerful capabilities of most spread sheet pro-
grams (e.g. Excel
© , Lotus 1-2-3 © ). Simply open your file downloaded by HI 92000
from your spread sheet program and then it is possible to make any elaboration
available with your software (e.g. graphics, statistic analysis). HI 92000 offers a
variety of features and has an on line help to support you throughout any situa-
tion.
7.1 SOFTWARE INSTALLATION
• Insert the CD into the corresponding PC drive.
• The software menu window should start automatically; (If it does not, go to the
folder “software” in the CD and double-click “setup.exe”); click “Install software”
and follow the instructions.
7.2 PC CONNECTION
• With the meter OFF, disconnect the probe.
• Connect the USB cable to the meter and to the
USB port on PC.
• Turn ON the meter; the message “PC connec-
tion” appears.
• Run the HI 92000 application software, select the number COM port within
the “Settings window” and then press CONNECT.
• HI 92000 downloads the logged data and on
the PC monitor a window with the GLP data and
a window with the logged lot will appear.
• On the meter display, during download, the
percentage of transferred data is visualized.
NOTE: To verify the USB number port, after cable
connected, press START in the task bar of Window ® .
In the main menu select “Settings” and then “Control panel”, “System”,
“Hardware”, “Device Manager” and “Ports”. In this last menu near
USB port there will be the COM number.