Hanna Instruments HI 9828, Инструкция по эксплуатации

Страница: 43 / 60

43
Plot
• By pressing PLOT the complete list of the lot
parameters appears.
• Scroll with the arrow keys to select the desired
parameter and then press OK to visualize the
graph.
• With the arrow keys it is possible to move the
cursor to highlight a sample of the lot; the sample
data are displayed below the graph.
• Press ESC to go back to the parameters list.
• Press again ESC to go to the 3 options menu.
Delete
• The message “The selected lot will be erased!
Continue?” appears; press YES to delete or NO
to go back to the previous screen.
NOTE: To go back to the LOG DATA menu press ESC repeatedly.
5.2.2 Delete all lots
• The message “All stored log data will be erased! Continue?” appears; press
YES to delete or NO to go back to the previous screen.
5.2.3 Remarks
It is possible to associate a remark to every sample.
• To add a remark, scroll with the arrow keys to highlight the entry REMARKS
and press OK.
• Press NEW to insert a new remark; a textbox,
where it is possible to insert the desired informa-
tion, appears.
• Press DELETE to cancel an existing remark.
NOTE: During logging it is possible to associate
the reading to a remark selected from the previously created remarks
list or to a new remark. See paragraph 5.1.1 ”Logging options”.