Hanna Instruments HI 9828, Инструкция по эксплуатации

Страница: 26 / 60

26
• The meter asks to confirm the password: type again the same password and
then press OK.
• The meter returns in the System Setup menu and the checkbox near the pass-
word entry is signed.
To disable the password:
• Press MODIFY to select the password entry.
• Insert the password and then press DISABLE. In the textbox appears NO.
• Press OK to confirm.
Restore factory settings
It is possible to reset the System Setup and Measurement Setup parameters to
their default values.
• Select the Restore factory settings entry and
press OK.
• The meter asks to confirm: press YES to con-
firm or NO to escape.
NOTE: It is possible to quit the system setup at any time by pressing ESC. For
each entry, if selection was not confirmed, the new setting will not be
accepted.