5
FRONT PANEL AND
FRONT PANEL AND
FRONT PANEL AND
FRONT PANEL AND
FRONT PANEL AND
SPECIFICATIONS OF H
SPECIFICATIONS OF H
SPECIFICATIONS OF H
SPECIFICATIONS OF H
SPECIFICATIONS OF HIIIII9017
9017
9017
9017
9017
1.
Program descriptions
Briefly describes the 6 programs
2.
Temperature LCD
This LCD displays the temperature measured by the
HI7669/2W
probe or the value that was manually set through the keyboard.
If the temperature has been set manually, the "°C" symbol will
flash.
When the temperature probe is connected the measured tempera-
ture is displayed and the "°C" symbol stops flashing.
When the temperature measured by the probe is out of range (-10
to 125°C) the "Err3" signal appears.
3.
pH and mV LCD
This LCD displays the pH or mV reading (pH and mV is toggled
with the RANGE key). The corresponding pH or mV symbol will be
displayed along with the measured value.
An error signal ("Err1", "Err2", "Err4" or "Err5") will appear on this
display to indicate that the range is exceeded or that the buffer
used for calibration is not recognized by the meter's microproces-
sor.
4.
Keyboard
ENTER A
key used in programming.
ENTER B
key used in programming.
CLEAR
key
to clear entry or silence alarm.
PGM
key
to select a program.
OFF
ON
ins rum n s
CON
RANGE
+/-
CAL
TEMP
ENTER
A
ENTER
B
CLEAR
7
8
9
4
5
6
1
2
3
0
.
PGM
HI 9017 MICROPROCESSOR pH METER
PROGRAMS
to
enter
temperature
alarm
to enter pH end point alarm
to enter RS 232 ESC code
to exit from any program
to clear entry or silence alarm
to manually enter calibration buffer value
to
enter
pH
alarm
to enter mV alarm
2
PGM
B
A
1
PGM
B
A
3
PGM
B
A
4
PGM
B
A
5
PGM
B
A
6
PGM
A
0
PGM
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
1st buffer
2nd buffer
upper limit
lower limit
upper limit
lower limit
upper limit
lower limit
end point value
alert value
ESC code
CLEAR
Standard pH buffer - 4.01, 7.01, 10.01
pH
°C
3
1
4
2
