Hanna Instruments HI 9161, Инструкция по эксплуатации

Страница: 19 / 21

37 36
WARRANTY WARRANTY
WARRANTY WARRANTY WARRANTY
All Hanna Instruments meters are warranted for two years
against defects in workmanship and materials when used for their
intended purpose and maintained according to instructions.
The probes are warranted for a period of six months.
This warranty is limited to repair or replacement free of charge .
Damages due to accidents, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure. If the repair
is not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization Number from the Cus-
tomer Service department and then send it with shipment costs
prepaid. When shipping any instrument, make sure it is properly
packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty
card within 14 days from the date of purchase.
All rights are reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner,
Hanna Instruments Inc., 584 Park East Drive, Woonsocket,
Rhode Island, 02895, USA.
Hanna Instruments reserves the right to modify the design,
construction and appearance of its products without advance
notice.
CALIBRATION TEST PLUGS
Hanna Test Plugs provide a quick and easy way to test the meter's
accuracy by simply connecting these Test Plugs to the probe connector
of the meter.
If the reading differs by more than ±0.4°C (±0.8°F) from the Test
Plug value, the unit is due for recalibration.
Choose the right Test Plug to suit your needs:
HI 762-18C Calibration key, -18.0°C ±0.4°C
HI 762000C Calibration key, 0.0°C ±0.4°C
HI 762070C Calibration key, +70.0°C ±0.4°C
HI 762-004F Calibration key, -0.4°F ±0.8°F
HI 762032F Calibration key, +32.0°F ±0.8°F
HI 762158F Calibration key, +158.0°F ±0.8°F
ADAPTERS/TRANSFORMERS
HI 710005 Adapter 110 VAC to 12 VDC
HI 710006 Adapter 220 VAC to 12 VDC
OTHER ACCESSORIES
HI 9200 Infrared Transmitter
HI 92000 Windows
®
compatible software for data transfer to PC
HI 710034 Plain Paper Spare Rolls (10 pcs)
HI 710035 Spare Ink Cartridge (1 pc)
HI 710031 Rugged carrying case
MANRHPRNR2 Instruction manual
Windows
®
is a registered Trademark of "Microsoft Co."