Hanna Instruments HI 83099 Скачать руководство пользователя страница 104

Страница: 104 / 136

104

Ozone

• Press the

Zero

key. The display will show “

-0.0-

” the meter is zeroed and ready for measurement.

• Remove the cuvette.

• Add the content of one packet of HI 93757-0

Ozone Reagent. Replace the cap and shake gently
for 20 seconds.

• Replace the cuvette into the holder and close the lid.

• Press

Timer

and the display will show the countdown prior to the measurement or, alternatively,

wait for 2 minutes and press

Read

. When the timer ends the meter will perform the reading.

• The instrument displays concentration in

mg/L of ozone

(chlorine free samples only).

ADDITIONAL MEASUREMENT PROCEDURE

For samples containing chlorine

• Select the

Ozone method using the procedure described

in the

Method Selection section (see page 12).

• Fill the cuvette with 10 mL of unreacted sample, up to

the mark, and replace the cap.

• Place the cuvette into the holder and close the lid.

10 mL

Содержание HI 83099









































































































































Результаты поиска

Содержание HI 83099

Отзывы:

Hanna Instruments HI 83099, Инструкция по эксплуатации, Страница: 104 / 136

Результаты поиска

Содержание HI 83099

Отзывы: