Hanna Instruments HI 8001, Инструкция по эксплуатации

Страница: 8 / 88

8
SOLAR RADIATION FACTOR:
- This option can be set using panel S 42 (CORRECTIONS). This factor
affects the irrigation time or volume extension in accordance with the set
value of the solar radiation sensor level and solar radiation accumulation.
The solar radiation accumulation extension setting and current value is
displayed on panel
C 06 (SOLAR RAD IRRIG) . Solar radiation extension
correction can be viewed using panel C 11 (SOL RAD EXTENT).
MANUAL FACTOR:
- This option can be set using panel S 42 (CORRECTIONS). Percentage
and corresponding value of time or volume can be viewed using panel C
12 (MAN FACTOR).
Total correction percentage, time or volume value is displayed on panel C 13
(TOTAL CORRECTION).
PRE/POST IRRIGATION:
In each irrigation program the pre-irrigation and post-irrigation time or volume
value (used to clean the irrigation pipes with pre-irrigation water) can be set
using panel
S 37 (PRE/POST IRRIG).
Panel C 01 (GENERAL INFO) displays the active irrigation program and active
sectors.
The active irrigation program is displayed on panel
C 02 (SENSORS STATE).
Related data regarding the active irrigation program (active irrigation program
number, last start condition and current / set repetition number) are displayed on
panel
C 03 (PROGRAM STATE).
Information about selected irrigation program, priority and irrigation program
conflict are displayed on panel
C 09 (PRIOR & CONFLICTS). Set value data,
correction value and irrigation completion (“Done”) value are displayed on
panel
C 10 (IRRIG STATE).
Information about the last start condition, date and time are displayed on panel
C 18 (PROG LAST START).
Total accumulation value from a previous date is displayed on panel C 19
(TOTAL ACCUMUL).
Accumulation value from previous date and activation number for a selected
irrigation program are displayed on panel
C 20 (PROGRAM ACCUMUL).
Accumulation value from previous date, for a selected sector, is displayed on
panel
C 21 (SECTOR ACCUMUL). In addition, this panel displays the valve
number assigned with the corresponding sector.
- Accumulations erase mode can be chosen on panel S 61 (ERASE STATIS-
TICS). The accumulation erase can be performed for all programs and