Hanna Instruments HI 2002, Инструкция по эксплуатации, Страница: 15 / 52

15 15
SETUP/ INST
ALLA
TION
Option Description Choices Default Basic mode
Set Auto Off
Used to save battery life by
automatically turning off when no key
press is detected for time set and meter
is not in active logging or calibration
mode.
5, 10, 30,
60 Min or Off
10 MIN Available
Sound
If enabled, a short audible tone is
produced for key stroke or calibration
confirmation and a longer tone for
wrong key.
On or Off On Available
Temperature Unit
Select degree Celsius or Fahrenheit
scale for displayed and logged
temperatures.
ºC or ºF ºC Available
LCD Contrast
Permits modification of the display
contrast for various lighting conditions.
1 to 8 3 Available
Flash Format*
Only seen when log
errors are present.
Permits formatting the flash drive. On or Off OFF Available
Message Transition
User may choose how messages are
displayed on third LCD line of display.
Word scroll
messages or
letter scroll
messages
Letter scroll
messages
Available
Reset Config To
Default Press the CAL/MODIFY key and GLP/CFM key (when prompted) to reset
parameters.
Available:
RESETS with
Basic Mode OFF.
Instrument
Firmware/Probe
Firmware
Displays firmware version of meter.
Using the
RANGE/
u
key switches
to Probe firmware (if connected) and
diagnostic made for troubleshooting.
View only
Current
firmware
version.
Available
Meter ID/
Meter SN/
Probe SN
User ID and Serial Number of meter
and probe (if connected). Use
RANGE/
u
to change between the
three parameters.
Meter ID is user
selectable 0000/Serial
Number
Available
Note: Options that are seen under special conditions only.