Hanna Instruments GROLINE MONITOR HI981420 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 44

Hanna Instruments GROLINE MONITOR HI981420 Скачать руководство пользователя страница 4

4

PRELIMINARY EXAMINA

TION

SAFETY MEASURES

1. PRELIMINARY EXAMINATION

This product is intended to monitor pH and conductivity levels in nutrient water. Remove the
monitor and accessories from the packaging and verify that no damage has occurred during
shipping. Remove the protective film from monitor. Contact your local Hanna Instruments Office if
items are missing or damaged.
Each monitor is supplied with:
•

HI1285‑8

pH/EC/TDS probe with built‑in temperature sensor, DIN connector and 2m (6.6’) cable

•

HI50036‑0

Quick Calibration solution sachets (2)

•

HI700661P

Electrode cleaning solution sachets for agriculture (2)

• 12VDC adapter
• Instruction manual
• Monitor Quality Certificate
• Probe Quality Certificate

Note: Save all packing material until you are sure that the monitor works correctly. Any

defective item must be returned in its original packing.

2. SAFETY MEASURES

Before using this product, make sure that it is entirely suitable for your specific
application and for the environment in which it is used.

Operation of this instrument may cause interference to other electronic equipment,
requiring the operator to take steps to correct interference. Any variation introduced by
the user to the supplied equipment may degrade the monitor’s EMC performance.

To avoid damage or burns, do not put the instrument in microwave ovens.
Do not use or store the monitor in hazardous environments.

«
...
2
3
4
5
6
...
»

Содержание GROLINE MONITOR HI981420













































Отзывы:

Нет отзывов