Hanna Instruments edge EC HI2003 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 39

Hanna Instruments edge EC HI2003 Скачать руководство пользователя страница 3

3

Remove the instrument & accessories from the packaging and verify damage
has not occurred during shipping. Remove protective fi lm from meter. Notify
your nearest Hanna Customer Service Center if damage is observed.

Each instrument is supplied with:

edge

EC

® (

HI2003

)

Bench cradle
Wall cradle
Electrode holder
USB cable
5 Vdc Power Adapter
Instruction Manual
Quality Certifi cate

HI 763100

: Digital 4 ring conductivity probe with integrated temperature sensor

1413 µS/cm and 12.88 mS/cm Conductivity Standard Sachets

Before using this product, make sure that it is entirely suitable for your specifi c
application and for the environment in which it is used.

Operation  of  this  instrument  may  cause  interference  to  other  electronic
equipment,  requiring  the  operator  to  take  steps  to  correct  interference.  Any
variation  introduced  by  the  user  to  the  supplied  equipment  may  degrade  the
instrument’s EMC performance.

To avoid damages or burns, do not put the instrument in microwave ovens.
For your and the instrument’s safety, do not use or store the instrument in
hazardous environments.

Note

: Save all packing material until you are sure that the instrument works

correctly. Any defective item must be returned in its original packing.

Included

Safety
Measures

«
1
2
3
4
5
...
»

Содержание edge EC HI2003








































Отзывы:

Нет отзывов