Hanna Instruments edge EC HI2003 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 39

Hanna Instruments edge EC HI2003 Скачать руководство пользователя страница 19

Setup/Installation

19

Logged data on the edge

EC

® can be transferred from the meter to a PC by

following these simple directions. Suitable operating systems include Windows
(Xp minimum), OS X or Linux.

1.

Connect edge

EC

® to the PC using the supplied micro USB cable.

2.

Turn on edge

EC

®.

3.

Press

SETUP

and select “LOG ON EDGE”.

4.

Press

MODIFY

then use

pq

keys to change to “EXPORT TO USB”.

5.

Press

CFM

and the USB/PC Tag is displayed.

6.

Press

SETUP

to exit.

The PC should detect the USB as a removable drive. Open the drive to view the
stored fi les. Log fi les are formatted as Comma separated values (*.CSV) and can
be opened with any text editor or spreadsheet program.

Note

:

•

Western Europe (ISO-88859-1) character set and English language are
suggested settings.

•

Other fi les may be visible depending upon computer settings. All fi les
stored will appear in this folder.

•

Adjust Font or column width, appropriately. Adjust the decimal places.

•

All conductivity measurements will be displayed as μS/cm.

Interval logs is designated as EC Lots. ie. ECLOT001, ECLOT002, ECLOT003.

The Manual Lots are ECLOTMAN.

The Stability Lots are ECLOTSTAB. All stability logs, regardless of stability
setting, are located in the same stability fi le for that measurement.

Click on the desired log to view data.

Note

:

•

If “ºC !” appeared in log data, the electrode/probe was used beyond it’s
operation specifi cations and the data is not considered reliable.

•

If “ºC !!” appeared in log data, the temperature sensor within the probe or
electrode is broken and the device should be replaced. Logged data should
not be considered reliable.

PC & Storage
Interface

«
...
17
18
19
20
21
...
»

Содержание edge EC HI2003








































Отзывы:

Нет отзывов