Ⅳ
. Inclusion to Z-Wave network
The sensor can be added to the Z-Wave network by following steps:
（
1
）
Power on the device by USB or batteries.
（
2
）
Set z-Wave gateway/hub to learning mode (see Z-Wave gateway/hub Operation
Manual)
（
3
）
Triple click
the device's Z-Wave button
（
4
）
The LED indicator of the sensor will keep flashing quickly. If the inclusion is successfully
connected, the LED light will be off. Otherwise, after a timeout of 30 seconds, it will be flash
ing slowly (enter the SmartStart function) and please repeat the operation of step (2) to
include to the network.
Tips:
If you want the multi- sensor to be a secure device that can communicate on
a Z-Wave network using secure/encrypted messages, then enabling a secure
Z-Wave controller is necessary
!