Technical Support :+82-2-3452-8966 / [email protected]
5 /23
1. General Considerations
1. It is recommended that switchgear or circuit breaker and overcurrent protection devices
should be installed near the device.
2. Use a power cord only provided with the device.
3. Do not use an extension cord.
4. Do not place anything on the powercable.
5. If you have the following emergencies, shut off the power supply and unplug the
powercord from outlet and contact your place of purchase or Hanil Scientific Inc.
- Unusual noises or smell from the equipment.
- Damage or wear of a power cord.
- Breakdown of circuit breaker, fuse or safety device.
- If you spill liquid on the equipment.
- If the equipment has been damaged.
1.2 Transport & Storage
1.3 Safety label on the Device
1.4 Electric safety
Insert the rotor and tubes symmetrically.
Firmly tighten the rotor door.
Watch your figers when close the lid.
- The device and the accessories must only be stored in dry rooms.
- Only lift and transport the device with sufficient number of helpers.
-Storage-
-Transport-
Ambient temperature 5℃~40℃
Maximum relative humidity 30%~85%
Air pressure 500~1060hpa
Ambient temperature -10℃~40℃
Maximum relative humidity 10%~90%
Air pressure 500~1060hpa
Mark indicating danger
and warning.
Mark indicating a place in
danger of electric shock.
Mark indicating earth
grounding
