13
13
2
2
Safety
Safety Rules
Rules
1)
1)
Only trained and authorized operator
Only trained and authorized operator
shall be permitted to operate the forklift.
shall be permitted to operate the forklift.
2)
2)
Operator must wear helmet, working
Operator must wear helmet, working
shoes and uniform
shoes and uniform
3)
3)
It is not allowed to reconfigure the truck
It is not allowed to reconfigure the truck
without manufacturer’s permission
without manufacturer’s permission
..
4)
4)
Do
not
work
in
flammable
and
Do
not
work
in
flammable
and
combustible
combustible environme
environment.
nt.
5)
5)
Check the oil, fluid leakage, deformation,
Check the oil, fluid leakage, deformation,
flexibility in certain time. If neglected,
flexibility in certain time. If neglected,
service life of forklift will be shorter and in
service life of forklift will be shorter and in
serious condition there will be
serious condition there will be accident.
accident.
–
–
Make sure change the “safety parts”
Make sure change the “safety parts”
during the schedule maintenance.
during the schedule maintenance.
–
–
Wipe off the oil, grease or water on the
Wipe off the oil, grease or water on the
soleplate, foot pedal and control stick.
soleplate, foot pedal and control stick.
–
–
No smoking or any spark, smoke near the
No smoking or any spark, smoke near the
battery when checking.
battery when checking.
–
–
Be careful of scald when checking motor
Be careful of scald when checking motor
and controller.
and controller.
6)
6)
The
controller
equips
with
energy
The
controller
equips
with
energy
accumulator, do not touch between B+
accumulator, do not touch between B+
and B- to avoid electric injury. If you need
and B- to avoid electric injury. If you need
check or clean the controller, connect
check or clean the controller, connect
load(like
load(like contactor
contactor coil
coil or
or horn)
horn) between
between
controller B+ and B- to discharge the
controller B+ and B- to discharge the
controller capacity.
controller capacity.
7)
7)
Whenever you find the forklift abnormal,
Whenever you find the forklift abnormal,
stop the truck, put on the DANGEROUS
stop the truck, put on the DANGEROUS
or FAULT sign to the truck, remove the
or FAULT sign to the truck, remove the
key, and report to the managing person.
key, and report to the managing person.
Only after eliminating the fault can you
Only after eliminating the fault can you
use the truck.
use the truck.
–
–
If there occurs to fault, battery electrolyte,
If there occurs to fault, battery electrolyte,
hydraulic oil or brake fluid leakage when
hydraulic oil or brake fluid leakage when
lifting loads, going up and down
lifting loads, going up and down the slope,
the slope,
please organize staff to repair.
please organize staff to repair.
8)
8)
Internal battery may generate explosive
Internal battery may generate explosive
gas, it’s prohibited any flame close the
gas, it’s prohibited any flame close the
battery. Never allow the tools close two
battery. Never allow the tools close two
poles of the battery to avoid spark or
poles of the battery to avoid spark or
short circuit.
short circuit.
9)
9)
The work ground of forklift shall be solid
The work ground of forklift shall be solid
and smooth concrete surface or similar
and smooth concrete surface or similar
ones. Pre-check the ground condition of
ones. Pre-check the ground condition of
working site. Tidy the working site, clean
working site. Tidy the working site, clean
obstacle, sweep macadam, muddy sand
obstacle, sweep macadam, muddy sand
and wipe off greasy dirt.
and wipe off greasy dirt.
10)
10)
Do not overload. Before operation, first
Do not overload. Before operation, first
know the curve chart on the load curve
know the curve chart on the load curve
plate well, which indicates the relation
plate well, which indicates the relation
https://www.besttruckmanuals.com/