HANGCHA CBD20-AEC1 Скачать руководство пользователя страница 14

Страница: 14 / 96

1.4.3 Others

Hood [4]

There install main parts as hydraulic unit, main drive unit and

There install main parts as hydraulic unit, main drive unit and electric system etc. under the hood.

electric system etc. under the hood.

When check or maintan, please take down the protective shield and then open the rear hood.

Fork [8]

Forks can be lifted or lowered to fetch goods. Because of four-bar mechanism, forks assembly will

move horizontally a distance when forks lift or lower.

CAUTION



It is forbidden to put hands, feet or any part of the body between lift assy and truck

frame when lifting or lowering.

Load wheel [9]

There is one load wheel under each front outrigger to ensure longitudinal stability.

Check the load wheel to find if there is disrepair or abnormal wear according to necessity. If there is

disrepair on the load wheel or its inner bearing, suspend the truck off the ground or jack the front

outrigger off the ground, replace the worn load wheel or the worn bearing, and renew sufficient

multi-purpose grease on the bearing.

Battery cover [10]

There is a handle in the

There is a handle in the front of the battery cover, and you can

front of the battery cover, and you can open the battery cover by pushing

open the battery cover by pushing

this handle.

When check battery, take out the plug, charge or replace the battery, you can easily open the

battery cover.

CAUTION



When closing the

When closing the battery cover

battery cover, protect

, protect your fingers from being

your fingers from being clamped.

clamped.

Pedal

（

Only for stand-on type

）

[13]

This pedal can be folded so that you can put down the pedal and stand on it when operating the

truck for a long distance. When transporting at a narrow space, folding the pedal, stand on ground to

operate the truck.

https://www.besttruckmanuals.com/

Содержание CBD20-AEC1

































































































Результаты поиска

Содержание CBD20-AEC1

Отзывы:

Похожие инструкции для CBD20-AEC1

Бренды по названию

Популярные бренды

HANGCHA CBD20-AEC1, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание CBD20-AEC1

Отзывы:

Похожие инструкции для CBD20-AEC1

Бренды по названию

Популярные бренды