Handy Home Products MARCO Series, Инструкция по сборке

Страница: 44 / 61

42
Move to the opposite end. Using the long
edge of the panel as a lever move the
panel side-to-side until the top corner is
ush to the peak
(Fig. C) and there is 1/4"
measurement to the gable trim (Fig. D) .
You may need to move your back wall to
get the 1/4" measurement. Secure panel
with two 2" nails in the corners.
2
You must square the roof by attaching one panel st. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury
until securely fastened.
Attach the 35-3/8 x 96” panel with the rough side up
(painted-grid lines side) with a 3/4" measurement on the
rafter
(Fig B) and the panel ush at the peak (Fig. A) .
Secure panel with two 2” nails in the corners.
1
BEGIN
Two Nails
2" (5 cm)
PARTS REQUIRED:
x4
7/16 x 35-3/8 x 96"
(1,1 x 89,9 x 244 cm)
x1
35-3/8"
(89,9 cm)
DOOR
Fig. A
Flush at peak.
Fig. C
3/4"
(1,9 cm)
Fig. B Gauge
Block
1/4"
(0,6 cm)
1/4"
(0,6 cm)
Gable
Trim
Fig. D
Flush at peak.
ROOF PANELS
3/4"
GAUGE BLOCK
GAA