Handy Home Products MARCO Series, Инструкция по сборке

Страница: 38 / 61

36
3" (7,6 cm)
Screw
Fig. D
3" (7,6 cm)
Screw
3" (7,6 cm)
Screw
2 x 3"
2" (5 cm)
Nail
3" (7,6 cm)
Nail
Side
Panel
Fig. C
Trim
2" (5 cm)
Nail
2" (5
cm) Nail
Trim
Stand front wall on oor.
It is important to secure the front wall in the following order.
2
Be sure the measurement between the panel
edge and the trim is the same along the entire
length. Then secure with one 2" nail in the upper
corner
(Fig. C) .
Nail along the panel edge into the trim using 2"
nails spaced 6" apart.
Secure the LN into oor using three 3" nails
(Fig. E) .
Screw through the front wall trim into the top
plate and at an angle into oor using 3" screws
(Fig. D, E) .
Repeat process to secure the right side of
the front wall.
Center front wall on oor side-to-side.
Nail the front wall ush to the oor
using 2" nails 6" apart. Angle nails
to hit oor frame
(Fig. A) .
Nail the lower side wall corner to the
front wall trim with one 2" nail
(Fig. B) .
1
BEGIN
CENTER
6"
(15,2 cm)
6"
(15,2 cm)
Fig. B
2" (5 cm)
Nail
Fig. A
Same
Measurement
2" (5 cm)
3" (7,6 cm) 3" (7,6 cm)
x4 x6
x32
FINISH
3
FRONT WALL INSTALLATION
DOOR
6"
(15,2 cm)
Fig. E
LG