HandTop HT3020UV-C-K, Руководство по эксплуатации

Страница: 95 / 97

94
/
97
4.Carriage moving malfunction
4.1 Servo driver error code
There are usually error messages displayed in the servo driver, deal with the issue
according to the corresponding information.
Order Code Indication Troubleshooting
1 oc1 or oc2 Current overload Check and see power connection of the
motor
2 oL1 or
oL2
Overload Check and see power connection of the
motor
3 Hu Voltage overload Verified that the power input is within the
rated values
4 Fb Fuser break Replace the servo driver
5 AH Amplifier overheat Keep the environment maintain below
40
℃
Keep the servo driver away from any heat
resource
6 EH Encoder overheat Keep the environment maintain below
40
℃
Remove any item baffles the heat
dissipating of the servo driver
7 LuP Main circuit voltage
defected
Check if there is any power supply
interruption
Verify the power input stably with rated
values
8 ¯PoF Anti-crashing &
scram stop
activated
Check if any anti-crashing attachment or
scram stop activates, reset
correspondingly.
9 ¯Pn0 Media locating
attachment enabled
Check the media locating attachment and
turn it down if ever enabled
10 =Pot Y-directional origin
indicating
Check the opt-electric sensor if the code
displays in the Y-directional non-origin
position
11 =PP1 Pulse signal
transmitting (the
state of running)
Indicates a normal state during
X-directional moving
Indicates a normal state of non-origin
position